Table des Matières
Publicité
Place the front module in the window of the
pushbutton panel in such a way that the tabs of
this module (1) clip into the guides on the sides
of the window (2). Press firmly to fix the front
module to the panel (3).
Put the speaker-microphone module in position
and press firmly to fix it to the pushbutton panel.
Make the connections between the audio unit and
the different elements of the panel (pushbuttons,
speaker-microphone module, camera module,
etc.). See “How to connect the audio unit to the
pushbutton panel”, page 13.
2 - W I R E
D O O R
E N T R Y
S Y S T E M S
Fix the panel onto the hinges of the flush-mounted
box. See the datasheet of the pushbutton entrance
panel.
Publicité
Table des Matières
