Sleep key
Operation lamp
Timer lamp
[SLEEP] on the remote
controller is lit
Hi
Med
Indoor fan
Lo
Silent
Sleep
Outdoor fan
Vertical air
Facing up
deflector
Horizontal
Shut
Compressor speed
Notes:
(1) The sleep operation starts when the sleep key is pressed.
(2) When the sleep key is set, the indoor fan is set to "Sleep Silent" (FWSOY_M or AFWSOY).
(3) The indoor fan speed does not change even when the fan speed mode is changed.
(4) When defrosting is to be set during sleep operation, defrosting is engaged and sleep operation is restored after defrosting.
(5) If the set time is changed during sleep operation, all data including set temperature, time, etc. is cleared and restarted.
(6) If sleep operation is canceled by the cancel key or sleep key all data is cleared.
(7) If the position of air deflector is being operated using remote control, the operation will be performed at any desired position of air
deflector.
NOTE:
1. Refer to the PWRITE-ZU data for the constats expressed by capital alphabet letters in the drawing.
Heating Sleep Operation
Set to 7 hours
See basic
operation
See basic
operation
– 66 –
7hr