Reflecta x11-Scan Mode D'emploi page 42

7. Previewing and Reviewing images on a TV screen
EN
Connect your scanner and TV set using an HDMI cable.
Set your TV to the proper HDMI terminal that you are
connecting, turn on the power of the scanner and press
the Home/Preview Button allow you to preview the image
of your film, or select the Galley Icon from the Home Page
then press the OK/( )Button to review your scanned
images on the TV screen.
You may also connect the scanner to TV set via USB
setting, to review the captured images up to a 4K/2K
image quality, depending on the maximum resolution of
your TV set.
For proper USB connection of your TV set please refer to
the instruction manual of your TV set, and treat your USB
and scanner connection like a card reader.
-16-