Reflecta x11-Scan Mode D'emploi page 32

3. Start Using Your x11-Scan
1. Insert the SD Card into the Scanner.
Insert the SD card into the SD Card Slot located at the
back of the scanner. Make sure that the golden print
on the card is facing downward. The card will be
locked automatically if it is inserted properly.
Note:
Only accept SD and SDHC card (Maximum 32GB).
Card with SDXC class is not compatible.
2. Connect the electric power to your Scanner.
Connect the Type-C USB cable terminal to the
Type-C USB Connector of the Scanner.
Connect the other larger USB terminal to the Power
Adaptor or the USB port of your computer, any of both
devices will supply the power needed by the scanner.
-6-
EN