Cleaning And Storing - AUDIOLINE Watch&Care NFS-100 Mode D'emploi

Cleaning and storing

• Both the exterior and the probe of the product should be
cleaned with a soft cloth moistened with alcohol or water.
• Do not place excessive pressure on the probe.
• Do not immerse the product in water or any other liquid.
• Keep the product away from direct sunlight, dust and any
contaminating substances.
• Keep the product at a normal room temperature.
The operating atmospheric temperature range for this ther-
mometer is 18 °C to 40 °C.
• When exposing the product to an abnormal room tempera-
ture, only use the product after keeping it at normal room
temperature for 30 minutes.
• The sensor on the front of the probe is
extremely sensitive. For accurate measu-
rements, always keep it clean and pro-
tect it from damage.
• Place the sensor facing downwards to
prevent any liquid from dropping on the
sensor. Carefully clean the sensor using
a cotton bud dipped in alcohol. After
cleaning, allow at least one hour drying
time before taking any measurement.
How to use
GB
31