Defrost - By Time - Russell Hobbs RHEM20L Mode D'emploi

1. Place food to be defrosted into the microwave.
2. Press the W.T./ TIME DEFROST button once and the screen will display dEF1.
3. Turn the control dial to select the necessary weight of your food. The range is 100-2000g.
4. Now Press START/ +30SEC./ CONFIRM to start defrosting.
-
DEFROST BY TIME
The weight and the defrosting power levels are adjusted automatically once the time has been
programmed in.
FOR EXAMPLE: Suppose you want to defrost food.
1. Place food to be defrosted into the microwave.
2. Press the W.T./ TIME DEFROST button twice and the screen will display dEF2.
3. Turn the control dial to select the desired defrost cycle time. The range goes up to 95
minutes.
4. Now Press START/ +30SEC./ CONFIRM to start defrosting.
The following example shows the steps to set up a program multi-stage cooking programme.
Some recipes may require setting a multi-stage program involving defrosting as well as different
microwave power levels.
I M S C
N ULTI TAGE OOKING
A maximum of two stages can be set. If one stage is defrosting, it should be inputted in at the
first stage. The alert tone will ring once after each stage and the next stage will begin. Note:
The auto menu cannot be set as a selection of multi-stage cooking.
Example: suppose you want to defrost food for 5 minutes, then cook with 80% microwave
power for 7 minutes. The steps are as follows:
1. Press W.T./ TIME DEFROST twice and the LCD screen will display dEF2.
14