Dismantling The Bed - Invacare Medley Ergo Manuel D'utilisation

2.4 Dismantle the bed
• Dismantle siderails and lifting pole.
• Bring the bed to its lowest position and adjust all mattress support sections to horizontal position.
• Disconnect the power card. Roll the cable onto the hook of the head end of the bed.
• Disconnect all the motor plugs from the motors (do not disconnect the backrest motor cable - cable 1).
• Dismantle the safety comb from the control by means of a tool, e.g. a flat headed screwdriver.
• Pull out the cables of the bed end motors and leg section motor.
• Separate the mattress support from the bed ends.
• Divide the head and foot end of the mattress support.
12