ILVE UP I76 Guide D'installation Et D'entretien page 9

E N E E E E N N N
Self-cleaning panels
If the oven is equipped with self-cleaning catalytic panels, at normal cooking temperatures (430°F) the catalytic enamel
favours the transformation of splashes of fat into a light powder residue. This powder may be removed with a damp cloth
once the oven has cooled. In this way the enamel surface remains porous and ensures maximum yield of the panels.
Fat-filter
(in selected models only)It is recommended that the fat fi lter is cleaned regularly as a build up of grease could damage
the thermostat and the fan motor.
F i g . 6: Removal of oven shelf support
F i g . 7: Removal of fat-fi lter (F)
F i g . 8: Removal of oven lamp
When the oven is out of order
In case your appliance is not working correctly, disconnect it from the mains and call the After Sales Service.
In case oven light is not working properly, disconnect the appliance from the mains, remove the protection glass of the
lamp and replace it (F i g . 8).
Take care that lamp must be suitable for working at high temperatures and has the proper technical features.
Cleaning the grills
We advise always cleaning the pan support grills after cooking. Wait until they have cooled down and then clean them
with a NON ACID detergent. Acid substances such as lemon juice or other acid detergents may cause irremediable
damage to the enamel on the grills. Dry the grills carefully with a cloth immediately after washing them. Washing in the
dishwasher not recommended.
Figure 6
I M P O RTA N T
Inser t foods when the oven is hot.«Grill» baking.
When appliances are equipped with grill, baking can be achieved keeping the door closed. By using the grill
you can cook meat, fish and even veg etables. At first, we sugg est using the upper runner (4). Po sition the
selector on grill and fix the temperature of 360˚F.
F
Figure 7
9
Figure 8