Num'axes CANICOM 5.500 LE Guide D'utilisation page 22

● Activate/deactivate the remote control
Remote control is supplied with battery fitted.
- Activate: press the On/Off button
appear on the LCD screen.
- Deactivate: press the On/Off button
is out.
To increase the battery life, we recommend you to deactivate the remote control if you are not using it for a
long period.
● Activate/deactivate the receiver collar
You can activate/deactivate the receiver collar with the all-in-one accessory or with the remote control.
Activate/deactivate the collar with the all-in-one accessory

A magnet located in the all-in-one accessory allows you to either switch On or Off the receiver collar.
- Activate : move the magnet located in the accessory towards the collar so that it comes into contact
with the
The indicator light on the collar will flash in green indicating the collar is On.
- Deactivate: move the magnet located in the accessory towards the collar so that it comes into contact
with the
The indicator light on the collar flashes from green to red then goes out indicating the collar is Off.
If you have several collars, renew the same procedure for each one.
To increase the battery life, we recommend you to deactivate the collar if you are not using it for a long period.
symbol located on the collar, hold for 1 second (ref. Diagram 5).
symbol located on the collar, hold for 1 second (ref. Diagram 5).
Gb - 22
located on the remote control for 1 second. Indications
located on the remote control for 1 second. The LCD screen
Activate/deactivate the receiver collar
with the all-in-one accessory
Diagram 5