Electrical Connection; Change Of Door Opening Direction Of Frozen Food Compartment - De Dietrich DRH 914 JE Guide D'installation Et D'utilisation

Masquer les pouces Voir aussi pour DRH 914 JE:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Electrical connection

Before plugging in, ensure that the voltage
and frequency shown on the rating plate cor-
respond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with

Change of door opening direction of frozen food compartment

After changing the outer door opening direc-
tion at this type it is necessary to remount the
door of the frozen food compartment as well.
Operations and their order can be seen in fig-
ure.
Press the retaining lever inside the lower
doorhinge.
Tilt the lower doorhinge out together with
the freezer compartment door then
remove it from the pin of the freezer com-
partment door.
Remove the rectangular plug and put it
into the opening got free on the other
side.
Having the freezer compartment door
turned by 180° put the lower hinge onto
the lower pin of the freezer compartment
door.
Put the upper hinge pin of the freezer
compartment door into the free opening,
then push the lower hinge into its place
together with the freezer compartment
door.
In case you do not want to perform the pro-
cedures above, call the nearest brand-mark
service. Technicians will accomplish the refit-
ting expertly for charge.
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility if
the above safety precautions are not
observed.
This appliance complies with the E.E.C.
Directives.
31

Publicité

Table des Matières
loading

Table des Matières