Electrical Connection; Door Reversal - De Dietrich DRH 915 JE Guide D'installation Et D'utilisation

28

Electrical connection

Before plugging in, ensure that the voltage
and frequency shown on the rating plate cor-
respond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with

Door reversal

After reversing the door, make sure the
magnetic seal adheres to the cabinet.
If the room temperature is cold (e.g. in
winter ), the seal may not adhere per-
fectly to the cabinet. In this case, wait
until the seal has softened on its own
or speed up the process by warming
the relevant part with a normal hair-
dryer.
TAW1MERA TAW1MERA T
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility if
the above safety precautions are not
observed.
This appliance complies with the E.E.C.
Directives.
T TAW2MERA TAW2MERA
TAW3MERA T TAW3MERA