Technical Data; Noise/Vibration Information - BTI UNIMASTER UM 400 SLP BB Notice Originale

OBJ_BUCH-3003-001.book Page 38 Friday, January 13, 2017 10:03 AM
11 Plunge saw blade*
12 Handle (insulated gripping surface)
13 Worklight (UM 400 SLP BB)
14 Clamping lever of the dust extraction*
15 Vacuum connection*

Technical Data

Oscillating Multitool
Art. No.
Preselection of orbital stroke rate
Rated power input
No-load speed n
0
Oscillation angle, left/right
Weight according to EPTA-Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these
values can vary.

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted noise levels of the product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and
h
uncertainty K determined according to EN 60745-2-4:
Sanding:
a
h
K
Sawing with plunge cut saw blade:
a
h
K
Sawing with segment saw blade:
a
h
K
Scraping:
a
h
K
The vibration level given in this information sheet
has been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may
significantly increase the exposure level over the
total working period.
38 | English
16 Tool sleeve*
17 Vacuum hose*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
UM 400
9085309
W
-1
min 8000–20000
°
kg
UM 400
dB(A)
dB(A)
dB
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not ac-
tually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
UM 550
9085310
 
400 550
8000–20000
1.5 1.8
1.5 1.6
/II /II
UM 550
80 81
91 92
3 3
3 3.5
1.5 1.5
11 10.5
1.5 1.5
6.5 6.5
1.5 1.5
6.0 6.5
1.5 1.5
1 609 92A 3E6 • 13.1.17