BTI UNIMASTER UM 400 SLP BB Notice Originale page 41

OBJ_BUCH-3003-001.book Page 41 Friday, January 13, 2017 10:03 AM
Accessory
BIM serrated
segment
saw blade
HM-Riff
sanding finger
HM-Riff
plunge cut
saw blade
HCS universal
joint cutter
BIM plunge
cut saw blade,
wood and
metal
TC plunge cut
saw blade,
metal
BIM plunge
cut saw blade,
wood and
metal
HCS plunge
cut saw blade,
wood
Mounting/Replacing the Application Tool/
Accessory
If required, remove an already mounted application
tool/accessory.
To do so, open the SDS lever 4 all the way. The ap-
plication tool/accessory will be ejected.
1 609 92A 3E6 • 13.1.17
Material Application
Insulation material, Precise cutting of soft materials;
Insulation panels, example: cutting insulation panels to size, flush
Floor panels, cutting protruding insulation material to length
Sound-dampening
floor panels,
Cardboard,
Carpets,
Rubber,
Leather
Wood, Sanding wood or paint in hard to reach areas
Paint without sanding paper;
example: sanding off paint between shutter
louvres, sanding wooden floors in corners
Fibreglass, Plunge cuts in severely abrasive materials;
Mortar, example: routing thin mosaic tiles
Wood
Expansion joints, Cutting and separating soft materials;
Putty, example: cutting silicone expansion joints or
Insulation materials putty
(rock wool)
Softwood, Fast, deep plunge cuts in wood and metal;
Hardwood, example: quick cutting of wood containing nails,
Veneered panels, deep plunge cuts in laminated panels and
Plastic-laminated precise shortening of door frames
panels,
Non-hardened nails
and screws
Stainless steel (Inox), Fast, deep plunge cuts in severely abrasive
Screws and nails, materials or metal;
Epoxy resin, example: fast cutting of kitchen front covers,
Glass fibre rein- easy cutting through hardened screws, nails and
forced plastics, stainless steel
Fibreglass,
Plasterboard,
Porous concrete
Wood, Fast, deep plunge cuts in wood, abrasive
Abrasive wooden wooden materials and plastics;
materials, example: fast cutting of non-ferrous metal pipes
Plastics, and profiles with smaller dimensions, easy
Hardened nails and cutting of non-hardened nails, screws and steel
screws, profiles with smaller dimensions
Non-ferrous metal
pipes
Softwood, Fast, deep separating and plunge cuts; also for
Dowels, sawing close to edges in corners and hard to
Tenons, reach areas;
Furniture example: deep plunge cut in softwood for
components installing a ventilation grid
Mount the requested application tool/accessory
(e.g. plunge cut saw blade 11) in such a manner on
the tool holder 5 that the offset faces downward
(see illustration on the graphics page; marking on
the application tool/accessory is readable from
above).
English | 41