Table Des Matières; Introduction - Astralpool COMPACT ELECTRICHEAT Mode D'emploi

TABLE OF CONTENTS
1 INTRODUCTION .......................................... p.1
2 PRODUCT DESCRIPTION .......................... p.2
3 INSTALLATION ............................................ p.2
3.1 POSITIONING ......................................... p.2
3.2 PIPING DETAILS .................................... p.2
3.3 ELECTRICAL CONNECTION ................. p.3
3.4 POWER REQUIREMENTS .................... p.3
3.5 ELECTRICAL DIAGRAM ........................ p.3

1 INTRODUCTION

Thank you for purchasing the new COMPACT® Electric heat exchanger. The
experience our company gas gained over more than 25 years in the world of
pool conditioning has been put to your service in this product.
INFORMATION
Please, read this manual carefully to ensure that your new
heater will give you years of trouble free service. Remember that
incorrect installation will affect your warranty.
Do not discard this manual, please, keep it for future reference.
It is recommended to take note of the following data:
INSTALLER COMPANY:
INSTALLER TELEPHONE:
INSTALLATION DATE:
HEATER MODEL:
HEATER SERIAL NUMBER:
DEALER'S STAMP
WARNING
This heater must be installed in a dry weatherproof enclosure.
Operating temperature range: +5ºC to +45ºC
Max operating Humidity: 90% without condensation.
If the heater is not used for a long period of time (winter), it must be
drained to prevent damage.
3.6 FLOW REQUIREMENTS ................................ p.3
3.7 WATER QUALITY REQUIREMENTS ............. p.3
3.8 CHANGING DEFAULT FLOW DIRECTION ... p.4
4 START-UP AND OPERATION ............................. p.4
5 TIME CLOCK ........................................................ p.5
6 TROUBLESHOOTING ......................................... p.5
7 MODBUS .............................................................. p.6
8 PRODUCT RECYCLING ...................................... p.6
9 WARRANTY CERTIFICATE ................................ p.6
INSTALLER'S STAMP
Pg. 1