Tare Function; Switch Off - Burg Wächter TARA PS 7620 Mode D'emploi

TARE function

If you need a measurement in between, you can use
the tare funcion and attach additonal weight
1. After you did weight your object, press the TARE
button. The display will delete the current weight
and shows the additional note „TARE".
2. You may use tare funcion in a row but you must not
exceed the maximum weight 40 kg. If more than
that, the overload flag will show „O-LD" („overload").
Temerature
1. Press „UNIT" Button for 2 seconds. The temperature
will appear on the screen. The tolerance is ± 2°C.
2. Press „ON/OFF" to exit the temperature mode.

Switch off

After 120 seconds not in use, te device will switch of
automaticly. If you like to swith it off by hand, press
ON/OFF.
For long-term-storage of the device, please remove
the battery.
Cleaning
Use only a damp cloth for cleaning.
Ensure that no water enters the device.
Do not use any readily inflammable, chemical,
corrosive, abrasive or sharp cleaning materials.
12 | English ProfiScale TARA 7620