Tare Function - Burg Wächter TARA PS 7610 Mode D'emploi

Unit interchange / Weighing
1. Wrist the strap around
a lift of lip of the
measuring object and
attach the hook to the
bracket.
2. Presse the button on
top side of the device.
LCD will show „18888"
3. Press button to select
the unit measure you prefer (g/ oz/ kg/ lb)
Weight measurement table:
1.000 g = 35 oz = 1 kg = 2.2 lb.
4. Hold the scale in a vertical state, lift up and keep
steady until the LCD display show a weight data
with „HOLD" indicator.
5. Put down the scale and read the weight.
6. Reset the scale and tare previous weight by press
button again.

TARE function

If you need a measurement in between, you can use
the tare funcion and attach additonal weight
1. After you did weight your object and the scale
shows „HOLD", press the button. The display will
delete the current weight and shows the add
„TARE".
2. Add more weight to the scale. The scale will show
the weight along with the note „TARE HOLD".
3. You may use tare funcion in a row but you must not
exceed the maximum weight 50 kg. If more than
that, the overload flag will show „err".
ProfiScale TARA 7610 English | 9