System Requirements; Package Contents; Safety Instructions; Frequently Asked Questions - i-tec U3HUB742 Mode D'emploi

Quick Start / USB 3.0 Charging HUB 7 Port

SYSTEM REQUIREMENTS

Hardware requirements
Notebook / PC with one available USB port
Operating system
Windows XP, Vista, Windows 7/8/8.1/10 32/64bit, macOS X 10.x or higher, Linux
SPECIFICATION
• 7x USB 3.0 port for connecting USB equipment, of which 2x USB 3.0
port for charging as per the USB-IF specification (BC 1.2)
• 1x USB 3.0 cable for connecting the HUB to a notebook / PC
• Transfer rate up to 5 Gbps
• USB charging detection mechanism for mobile devices
• Plug & Play function
• Overload and overcurrent protection
• LED diode
• Storage temperature -10~85 °C
• Working temperature 0-40 °C
• Power adapter: input AC 100-240 V, 50-60 Hz, 1.0 A; output DC 12 V, 2 A
• OS Windows XP, Vista, 7/8/8.1/10 32/64bit, macOS X 10.x or higher, Linux
• Product dimensions 133 x 60 x 27 mm
• Product weight 107 g

PACKAGE CONTENTS

• i-tec USB 3.0 HUB 7 Port
• USB 3.0 cable type A/B (90 cm)
• Power adapter (DC cable 115 cm)
• User Guide

SAFETY INSTRUCTIONS

• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – you will prevent it from slipping and
falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user
manual.

FREQUENTLY ASKED QUESTIONS

Available on our website www.i-tec.cz/en on the "FAQ" tab of this product.
EN
9