Cleaning - Silk-n GoBrush Mist Mode D'emploi

Hair type
Fine
Normal
Thick
9. Proceed in the same way for every hair section.
While sectioning the hair, you can let the steam brush
straightener rest on the heat-resistant mat
10. When done, press and hold the control button
message "OFF" shows on the display.
11. Unplug the steam brush straightener and allow it to cool
down completely on the heat-resistant mat. The steam brush
straightener is only completely without power when the mains
plug is pulled out of the socket.
12. Empty the water tank
use. To do so, remove the water tank from the steam brush
straightener by pulling the water tank out while pushing the
tank lock switch
the rubber closure
Close the rubber closure and replace the water tank to the
steam brush straightener when done.
Locking the temperature: Press and hold the steam
button
11
lock the temperature setting. To deactivate this feature,
press and hold the steam button until the lock icon is
turned off.

7. Cleaning

WARNING! RISK OF INJURY!
• Always unplug and let the steam brush
straightener completely cool down before
cleaning.
Speed
Around 5–8 cm per second
Around 5 cm per second
Around 2–3 cm per second
if there is still water in it after
7
towards the lock icon (LOCK). Then open
9
on the water tank to empty the water.
8
until the lock icon ( ) shows on the display to
included.
6
until the
12
EN
16