Cleaning - Silk-n AUTOTWIST Mode D'emploi

To allow the curl to set, do not comb or brush the hair until it
EN
cools.
11. Repeat steps 5–10 for other hair strands.
To achieve different types of curls and waves, change the
operating temperature and curling directions.
If you need to temporarily place the product on a surface,
make sure it is heat-resistant to avoid damage.
12. When done, press and hold the on/off button until the
temperature indicator turns off and a beep sound is heard.
The product is now switched off.
13. Disconnect the mains cord from the mains socket.
14. Place the product on a heat-resistant surface until the product
is completely cooled down.
• The product will automatically switch off when it is
• The curling barrel may get stains if it is used on dyed

7 Cleaning

WARNING! RISK OF INJURY!
• Always disconnect the mains cord and let
the product completely cool down before
cleaning.
NOTICE! RISK OF DAMAGE!
• Never immerse the product in water or
other liquids. Make sure that no water or
other liquids penetrate the housing.
• Do not use any aggressive cleaners, brushes
with metal or nylon bristles, or sharp or
metallic cleaning utensils such as knives, hard
scrapers and the like.
13
left idle for 30 minutes. This is designed as a safety
feature only. Always remember to switch off and
unplug the product after each use.
hair.