Switching On/Off And Selecting A Temperature; Straightening Hair - Silk-n GoBrush Mist Mode D'emploi

6.3 Switching on/off and selecting a temperature

1. Connect the mains plug to an easily accessible socket. The
message "OFF" will show on the display
brush straightener is connected to power.
2. Press and hold the control button
brush straightener. On the display, the progress bars ( ) are
flashing until the steam brush straightener has reached the
default operating temperature (120 °C) (see Fig. B).
3. To select another operating temperature, press the control
button repeatedly to cycle through the temperature settings
and select a desired one. You can select a temperature
setting between 120 °C and 230 °C. Each press of the button
will increase the temperature setting by 5 °C. Once a new
temperature setting is selected, the progress bars ( ) will
flash until the steam brush straightener has reached the newly
selected operating temperature.
Below are recommended settings. If you are unsure, start
with a lower temperature and increase the temperature as
necessary.
Temperature Hair type
120 °C–155 °C Fine, damaged or chemically treated
160 °C–195 °C Normal
200 °C–230 °C Thick, curly, not chemically treated
4. To switch off the steam brush straightener, press and hold the
control button until the message "OFF" shows on the display.
For safety purposes, the steam brush straightener will automat-
ically shut down after 1 hour (Auto Shut Off Protection) in case
you forget to switch it off.

6.4 Straightening hair

WARNING! RISK OF INJURY!
• Ensure that the heating plates do not touch
your scalp.
once the steam
10
to switch on the steam
12
EN
14