Network Requirements; System Requirements - Paradigm PREMIUM WIRELESS Série Mode D'emploi

NETWORK REQUIREMENTS

You must have the following to connect your Paradigm product to
your network:
• A high-speed DSL/Cable modem or a fiber-to-the-home
broadband connection for reliable playback of music services
based on the internet. Note: Satellite internet services are
prone to playback issues due to fluctuating download rates.
• If your modem is not a modem/router combination you must
purchase and install a router into your home network before
proceeding.
• If you plan to use the DTS Play-Fi
iOS device or you are setting up a Paradigm product for Wi-Fi
streaming, you will need a wireless router.
• Have your network password ready before connecting the
Paradigm product to your network.
NOTE: To make the quickest connection, use a dual-band router
and connect your Paradigm Product to the 5G network instead of
the 2.4 Network.

SYSTEM REQUIREMENTS

• An Android device running Android 2.2 or later.
• An iOS device running iOS 6.0 or later.
App on an Android or
® ™
Paradigm Premium Wireless Series Owner's Manual
NOTE: If your wireless connectivity is weak or not available,
connect your Paradigm product to your router with the supplied
ethernet cable.
TIP! Paradigm Premium Wireless Series products communicate
with wireless networks that support 802.11 g/n wireless
technology. For the fastest streaming performance, a network
that supports 802.11 n wireless technology is recommended. A
network supporting 802.11b may be used, but it will effectively
stream to only one device equipped with DTS Play-Fi
TIP! For superior performance connect your PC or NAS (Network-
Attached Storage) drive that holds your personal music library to
your network router using the provided Ethernet cable.
• A Windows PC running Windows
®
.
®
7, 8 or 8.1 (32 and 64 bit).
®
7