Updates; Reboot (Power Cycle) & Factory Reset; Enable/Disable Auto Input Mode - Paradigm PREMIUM WIRELESS Série Mode D'emploi

UPDATES

DTS Play-Fi App Update:
®
If the DTS Play-Fi app on your device requires an update, the app
®
will notify you that an update is available and guide you through
the update process.
REBOOT (POWER CYCLE) &
FACTORY RESET
Reboot (Power Cycle):
PRESS and HOLD the Power button ( ) for 3 seconds. The Mute
button ( ) will start blinking once a refresh has been achieved;
upon releasing the button a tone will verify a refresh.
ENABLE/DISABLE AUTO
INPUT MODE
Paradigm PW products can be configured to automatically select
the AUX input when the Play-Fi app is turned off. This mode can
be useful when using the PW product to improve TV audio, for
example, through the AUX input when wireless music streaming
16
Paradigm Firmware Update:
At Paradigm we constantly strive to improve the performance and
functionality of your system, as a result from time to time your
Paradigm Premium Wirless Series product will require firmware
updates. Please regularly check our website at www.paradigm.com
for the latest firmware updates.
Factory Reset:
PRESS and HOLD the Power button ( ) for 10 seconds (at 3 seconds
the Mute button ( ) will start blinking); once you hear a tone (at 10
seconds) to verify a reset, immediately release the reset button.
is not in use. To enable auto input mode, hold the input button for
five seconds. Hold it again for five seconds again to cancel.