Parker Service Master Easy Mode D'emploi page 108

Recording measured values
Memory function POINT
Measurement points representing a given machine sequence (for ex-
ample, lifting, sinking, operation under load, off-load operation etc.) are
saved in a 'point-to-point curve'. In the example shown, the channels p1,
p2 and Q4 are connected.
108
The first data record will be saved; for
example, p1, p2 and Q4
The second data record will be saved; for
example, p1, p2 and Q4
The third data record will be saved; for
example, p1, p2 and Q4
V1.0/12.06