Display Format (Disp) - Parker Service Master Easy Mode D'emploi

• The following message will be displayed if no sensor is connected
to the device:
.1

Display format (DISP)

The TEMP display applies only to 'SCPT' type sensors.
V1.0/12.06
Connecting the sensors/display functions
Press DISP (once)
It is possible to change the display format by
pressing DISP (once only).
Available for selection:
ACT
= Actual values
MIN = Minimum values
MAX = Maximum values (pressure spikes)
FS = Full scale (upper range value)
TEMP = Temperature display
81