Parker Service Master Easy Mode D'emploi page 113

Memory function MANUAL
The manual trigger function documents the process of recording meas-
ured values triggered by a manual start signal initiated by the user.
Automatic recording of measured values ends after a predetermined
measurement time.
For this reason, time-dependent recordings of measured values are
started manually.
The following parameters must be set:
Menu
TIME UNIT>
DURATION>
PRE
TRIGGER>
TRIGGER>
V1.0/12.06
Setting/ Example
pre-selection
sec, hrs h
Number 100
Number 1
IN p1
Recording measured values
Notes
Pre-selected time unit
(trigger/pre-trigger)
Recording time
Pre-trigger time (time
before the trigger signal)
Starting-point measuring
channel
11