Before Using Your Fridge; How To Operate The Appliance; Thermostat Setting - Burg BKS82A+ Guide D'utilisation

Before Using your Fridge

• When it is operated for the first time or after transportation, keep your
fridge in the upright position for 3 hours and plug it on to allow efficient
operation. Otherwise, you may damage the compressor.
• Your fridge may have a smell when it is operated for the first time; the smell will fade
away when your fridge starts to cool.
PART 2.

HOW TO OPERATE THE APPLIANCE

Thermostat setting

The thermostat automatically regulates the inside temperature of the refrigerator. By rotating
the knob from position 1 to 5, colder temperatures can be obtained.
Important note: Do not try to rotate knob beyond 1 position it will stop your appliance.
• For short-term storage of food in the fridge, you can set the knob between minimum and
medium position (1-3).
• For long-term storage of food in the fridge, you can set knob medium position. (3-4)
• Note that; the ambient temperature, temperature of the freshly stored food and how
often the door is opened, affects the temperature in the fridge. If required, change the
temperature setting.
• When you first switch on the appliance, you should ideally try to run it without any food
in for 24 hours and not open the door. If you need to use it straight away, try not to put
much food inside.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting
in order not to damage the compressor.
• The larders (coolers) have not any freezer compartment but can cool up to 4 - 6 °C.
• This appliance is designed for use at an ambient temperature within the 16°C - 38°C
range.
EN -20-