Tiiwee Home Alarm Kit Manuel page 9

1. Enter the pairing mode by long pressing the SET button [
lit.
2. Press the arm or disarm button on your remote once. Two beeps will be heard as a
confirmation.
3. Press the On/Off Button [ ] on the Alarm unit to exit the pairing mode
Your remote control is now paired. Multiple remotes can be connected to any Alarm unit.
Also, the remote control can be linked to multiple Alarm units using the method described.
How to add an additional A1 Alarm Unit
Sometimes a second or third siren might be needed in your home. In those cases, an
additional A1 Alarm siren can easily be added to your existing A1 Alarm system.
IMPORTANT: A1 Alarm Units cannot be directly paired to each other. A1 Alarm units are
receivers and do not transmit any signals. They receive their signals from the sensors of
the tiiwee Home Alarm system but not from other A1 Alarm units.
IMPORTANT: Adding an A1 Alarm Unit means that all your existing window & door
sensors, PIR motion sensors and remote controls need to be directly paired to the new
A1 Alarm unit. Luckily, this is a very simple procedure.
Please visit the sections "Pairing with additional sensors" and "Pairing with additional
remote controls" and proceed as described there.
After all sensors have been paired successfully to the new A1 Alarm Unit, both your A1
Alarm Units will sound when a sensor triggers a signal.
9
]. All 4 LEDs are now