Automatic Channel Display; Setting The Temperature Unit; Memory Function - DS Produkte WSC802 Mode D'emploi

– If in setting mode you do not press any button for
around 10 seconds, the sensor switches back to nor-
mal mode and transmits an RF signal.
– The °C/°F button of the sensor only works with a
sensor model with an LCD display.

Automatic Channel Display

The device features automatic channel display. If this is switched
on, both the inside temperature and the three possible outside
temperatures are shown on the display one after the other for
6 seconds in each case.
1. To display a specifi c channel, press the SENSOR button
until the corresponding symbol is visible.
2. If you press it again, the symbol for the automatic channel
display

Setting the Temperature Unit

The current ambient temperature is shown on the display of
the basic device.
• During the time display, press the °C/°F button to switch
between the °Celsius and °Fahrenheit display.

Memory Function

The weather station automatically stores the maximum and
minimum temperature.
1. Press the MEMORY button. "MAX" fl ashes on the display
for the maximum temperature stored.
2. If you press the button again, "MIN" fl ashes and the mini-
mum temperature stored appears.
4_DE-GB-FR-NL_A6_V0.indb 40 4_DE-GB-FR-NL_A6_V0.indb 40
appears next to the sensor symbol.
40
11.10.2013 10:20:44 11.10.2013 10:20:44