DS Produkte WSC802 Mode D'emploi page 38

Memory function:
•
MEMORY
In clock mode
•
SENSOR
•
Sliding switch to change the level of illumination
of the illuminated cubes (OFF/AUTO/ON)
Sliding switch to change the level of illumination
of the display (dark/dim/bright)
Reset all settings
RESET
At the top of the basic device you will fi nd the following
adjusting button (is activated by simply pressing on the housing):
In clock mode:
•
L I G H T /
SNOOZE
In alarm mode:
•
If in setting mode you do not press any button for
around 10 seconds, the device switches back to time
display.
4_DE-GB-FR-NL_A6_V0.indb 38 4_DE-GB-FR-NL_A6_V0.indb 38
Display the stored min and max tempera-
ture
Switch the display between the inside tem-
perature and the three outside tempera-
ture displays as well as the auto scroll
Establish new link to the sensor (new re-
trieval of the RF signal).
Illuminate the display and the illuminated
cubes depending on set lighting interval.
Activate the snooze function when the
alarm sounds.
38
11.10.2013 10:20:43 11.10.2013 10:20:43