Promax DT-301 Guide Rapide De Configuration page 25

QUICK CONFIGURATION GUIDE. DT-301/302
5. CAM CARD
A CAM card (Conditional Access Module) is an electronic device that
incorporates a slot for a smart card, which equips the system with
appropriate hardware to view the contents of a specific encrypted channel.
CAM cards can be used in the receiver models DT-301/302. The
DT-302 dual module has two slots for two CAM cards.
Follow the steps below to install the CAM card:
1.- Remove the screw from the lid placed at the top of the module
(Fig. 2.-).
2.- Remove the lid.
3.- Host the card carefully into the CAM slot (Fig. 3.-), making sure it
is properly inserted. Note that the card has a single position of
insertion. Guidance placed in the card's lateral determines the
position.
11/2011
Figure 2.-
Page 11