Promax DT-301 Guide Rapide De Configuration page 24

Available options in the decoder are:
Service List
It shows all services detected and allows you to select what
services will pass the filter. Press ENTER to select / deselect a
service. A tick indicates that the service has been selected and
therefore will be distributed along the TV network.
Services (LCN) (Logic Channel Number).
Is the first logic channel number assigned to the first channel of
the receiver.
PID Filtering
Allows the user to remove up to 4 channel services by entering
the service PID (Program Identifier Number) that you want to
remove. It is a numeric field.
TS ID
Allows you to edit the number that identifies the transport stream.
It is a numeric field.
CAM
It shows the parameters relating to the decoding card.
Firmware Version:
It displays information about the firmware version of the decoder.
- Firmware Version: It displays information about the module.
- Save: It saves all the changes made and validated.
Press ENTER
ATTENTION!
If you do not save these changes they will be lost when you turn off the
control module!
Page 10
QUICK CONFIGURATION GUIDE. DT-301/302
to CONFIRM that you want to save the changes.
11/2011