Promax DT-301 Guide Rapide De Configuration page 16

1.1 SPECIFICATIONS
DVB-S/S2 FIDVB-S/S2 FI input
Type
Connector
Range Frequency
Input Level
Information
LNB Power supply
Voltage
Current
22 kHz Signal
Voltage:
Frequency:
DVB-S Receiver Parameters
Symbol Rate
Roll off
Code Rate
Spectral Inversion
DVB-S2 Receiver Parameters
Constellation
SymbolRate (QPSK)
SymbolRate (8PSK)
Roll-off
Code Rate (QPSK)
Code Rate (8PSK)
Spectral Inversion
Decrypting multiples services
Interface
Maximum number of
decrypted services
Configuration
Page 2
QUICK CONFIGURATION GUIDE. DT-301/302
1 (DT-301) or
DVB-S/S2 FI inputs.
75 Ω Type-F, Female.
From 950 MHz to 2150 MHz.
40 – 110 dBµV.
MER of the signal
OFF, 13 V and 18 V (± 1 V).
< 400 mA.
ON, OFF.
0.65 V ± 0.35 V.
22 KHz ± 4 KHz.
2 – 45 Mbauds.
0.35.
Automatic (1/2, 2/3, 3/4, 5/6, 7/8).
Automatic (ON, OFF).
QPSK, 8PSK (Auto).
2 – 33 Mbauds.
2 – 30 Mbauds.
Factor Automatic ( 0.20 , 0.25 and 0.35).
Automatic (1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4,
4/5, 5/6, 8/9, 9/10 ).
Automatic (3/5, 2/3, 3/4, 5/6, 8/9, 9/10).
Automatic (ON, OFF).
1 Common Interface (DT-301) or 2 independent
Common Interfaces (DT-302)
Depending on the CAM module you use (see
DT-902)
Through the DT-800 Control Module in local or
remote mode (PC). See DT-800 specifications.
2 (DT-302) independent
11/2011