Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
QUICK CONFIGURATION GUIDE. DT-301/302
3.
NAVIGATION AND EDITION OF VALUES
3.1
Control Module
The DT-800 control module configures the DT-301/302 module:
1.-
After assembling and connecting, turn on the DT-800. After
scanning, check that appears the DT-301/302 module appears
in the list of module shown on the screen.
2.-
Press ENTER
access password (password by default "2008"). If the password is
right you will access to the configuration menu.
3.-
Use RIGHT
finding
DT-301/302 module should be flickering when the module
appears on screen.
4.-
Press ENTER
DT-301/302.
For more information, refer to the manual supplied with the DT-800
module control.
3.2
Navigation along the configuration menu
•
Press the LEFT
options.
•
To exit a menu option, press the ENTER
•
To validate a change and exit, press the ENTER
•
To exit without validating press the ESCAPE
3.3
Editing a numeric field
1.-
Press the ENTER
11/2011
to get into the Password option and enter the
or LEFT
the
DT-301/302.
to get into the configuration option of the
or RIGHT
key to get into a menu option.
to move among modules, until
The
LED
"Program"
key to move among the menu
or DOWN
key.
of
the
key.
key.
Page 7
Publicité
Table des Matières
