ETNA ABE590RVS Mode D'emploi page 53

INSTALLATION
Assembly
Fitting the controls (D)
• Fasten the controls (D) using the 3 pre-mounted screws (G).
• Attach the flexible exhaust pipe H to the flange F.
Assembling the hood:
• Screw the inner frame (D) to the motor housing using the
4 screws (E).
• Remove the 2 screws (A) from the inner frame. The top part
of the inner frame (B) can now be moved in relation to the
bottom part of the inner frame (C).
EN 11