Usb Connection - Telefunken MU 802 Mode D'emploi

Description
Battery control lamp
[1]
[1] Battery control lamp
• Green light = battery charge exceeds 80%
• Green flashing = battery is being charged
• Yellow light = battery status 20% to below 80%
• Red light = battery charge falls below 20%
The display „Sun Power" (flashing
[2]
in green [2]) serves to indicate the
solar loudspeaker's charging of
by solar radiation.
14

USB Connection

• Your solar loudspeaker has been equipped
with USB port. It offers the opportunity of char-
ging your SOUND.MOBILE independent from
solar radiation by deploying appropriate adap-
tors (for accessories, please refer to page 13).
➡ Open the USB cover flap, and plug the USB
cable into the USB port.
➡
If necessary, connect the cable to the corre-
sponding adaptor (not included with the scope
of delivery, see accessories on p. 13).
[3] USB port
[3]
[4] USB cable
[4]
Notes
➡
In daytime, please ensure to place SOUND.
MOBILE in a manner, which allows for full sun-
light absorption in order to guarantee full battery
charge.
➡
Please ensure to always keep the solar panel
clean. Clean it as required and do not use any
aggressive abrasives or similar but a soft cloth
only (no microfiber cloth).
• The solar loudspeaker's to simultaneous con-
nection to several audio devices is infeasible.
➡
Please ensure the maximum distance bet-
ween solar loudspeaker and output device not
to exceed approx. 10 meters. Sound interferen-
ces might be caused by too far distances and/
or possible obstacles between output device
and solar speaker.
DE
• Sounds are exclusively transferred by Blue-
tooth ® . Consequentially, the solar loudspeaker
can only be used in combination with suchlike
devices. In case you wish to link additional
devices (e.g. laptop, PC, etc.), which are not
equipped with Bluetooth ® , respective adapters
are available on the market (see p. 13).
15
EN FR IT