Dmx Linking - Chauvet DJ INTIMIDATOR SPOT 110 Mode D'emploi

EN
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
Menu Map
Mode
Address Addr
Channel
ChMd
Mode
Show Mode ShMd
Sensitivity SEnS
Pan Reverse PAn
Tilt Reverse tILt
Manual
MAnu
Mode
Version uEr
Factory
LoAd
Reset

DMX Linking

The Intimidator Spot 110 can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 501.
Master/Slave Connection
The Intimidator Spot 110 uses the DMX data connection for its Master/Slave mode. Information about configuring the
Intimidator Spot 110 for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
Gobos
3
QUICK REFERENCE GUIDE
Programming Levels
A001–512
6Ch
12Ch
Auto SP 1–10
Soud
0–100
no
YES
no
YES
PAn P 0–255
tILt t 0–255
CoLo C 0–255
Gobo G 0–255
dIMM d 0–255
Stro S 0–255
u_ _ _
no
YES
Description
Sets the DMX starting address
Selects the DMX personality
Selects Auto mode and speed
Selects sound-active mode
Sets the sound sensitivity
Normal pan operation
Reverse pan operation
Normal tilt operation
Reverse tilt operation
Manual pan control
Manual tilt control
Manual color control
Manual gobo control
Manual dimmer control
Manual strobe control
Displays current firmware version
Loads factory defaults
Intimidator Spot 110 QRG Rev. 1