Operating the oven
Control panel display modes
Sleep Mode
Your control panel will remain in a sleep mode when not in use. Only the clock will
display. You will need to wake the control panel to begin any function.
Wake Mode
To wake the control panel, touch the wake-up key. After 2 minutes without activity
(or one minute when the oven is operating in standby mode), the control panel will
return to Sleep mode. User preferences are available in this mode as well as timers,
the oven light, and the control lock.
30 English
NE58K9850WS_AA_DG68-00723A-01_EN.indd 30
Setting the clock
The clock must be set to the correct time of day for the automatic oven timing
functions to work properly.
•
The time of day cannot be changed during timed cooking, delay-timed
cooking, or a self-cleaning cycle.
•
You can choose between a 12-hour or 24-hour display. The default is 12-hour.
How to set the clock
Press Clock.
1.
2.
Press Clock to select AM or PM. (Skip this step on 24 hour display setting)
3.
Enter the current time in hours and minutes on the number pad, eg. 1, 3, 0, for
1:30.
4.
Press Clock or START/SET to save the changes.
Setting the kitchen timer
The kitchen timer serves as an extra timer that will beep when the set time has
elapsed. It does not start or stop cooking functions. You can use the kitchen timer
with any of the other oven functions.
How to set the timer
1.
Press Timer1 On/Off (Timer2 On/Off).
2.
Enter the amount of time you want using the number pad, eg. 1, 5. The timer
can be set for any amount of time from 1 minute to 9 hours and 59 minutes.
If you make a mistake, press Clear, and then enter the amount of time again.
3.
Press Timer1 On/Off (Timer2 On/Off) or START/SET.
4.
When the set time has elapsed, the oven will beep and the display will show
End until you press the Timer1 On/Off (Timer2 On/Off) pad. You can cancel
the timer at any time by pressing Timer1 On/Off (Timer2 On/Off).
1/30/2016 11:17:50 AM