How to re-install the warming drawer
Right roller guide rail
NE58K9850WS_AA_DG68-00723A-01_EN.indd 57
1.
Position the ends of the full-extension
roller guide rails in the side rails of the
drawer opening.
2.
Push in the drawer to close it and
snap the locking clips into place.
Changing the oven light
The oven light is a standard 40-watt appliance bulb. It will come on when the oven
door is open. When the oven door is closed, press the
off. It will not work during a self-cleaning cycle.
1.
2.
3.
Remove
Replace
4.
5.
Glass bulb cover
Bulb
6.
Before changing your oven light bulb,
disconnect the electrical power to the range
at the main fuse or circuit breaker panel.
Make sure the oven and the bulb are cool.
pad to turn it on or
Make sure the oven and the bulb are
cool.
Unplug the range or disconnect the
power.
Turn the glass bulb cover in the
back of the oven counterclockwise to
remove.
Turn the bulb counterclockwise to
remove it from its socket.
Insert a new 40 watt appliance
bulb, and then turn it clockwise to
tighten. Replace the bulb cover by
turning clockwise.
Plug in the range or reconnect the
power.
CAUTION
English 57
1/30/2016 11:18:02 AM