Before You Begin; Getting Started; Setting The Clock; Control Panel Display Modes - Samsung NE58H9950WS Manuel D'utilisation

before you begin

Clean the oven thoroughly before using it for the first time. Remove the accessories, set the oven to bake,
and then run the oven at 400 °F for 1 hour before using. There will be a distinctive odor. This is normal.
Ensure your kitchen is well ventilated during this conditioning period.

getting started

SETTING THE CLOCK

The clock must be set to the correct time of day for the automatic oven timing functions to work properly.
• The time of day cannot be changed during a timed cooking, a delay-timed cooking, or a self-
cleaning cycle.
• You can choose between a 12-hour or 24-hour display. The default is 12-hour.
How to set the clock
1. Start the set up.
Press CLOCK.
2. Press CLOCK to select AM or PM.
(Skip this step on 24 hour display setting)
3. Enter the current time in hours and minutes on the number pad.
eg. 1,3,0 for 1:30
4. Press CLOCK or START SET to save the changes.

CONTROL PANEL DISPLAY MODES

Sleep Mode
Your control panel will remain in a sleep mode when not in use. Only the clock will display. You will
need to wake the control panel to begin any function.
Wake Mode
To wake the control panel, touch the wake-up key. After 2 minutes without activity (or one minute
when the oven is operating in standby mode), the control panel will return to Sleep mode. User
preferences are available in this mode as well as timers, the oven light, and the control lock.
Manual Users_NE58H9950WS_AA_AC_DG68-00531A-00_EN.indd 32
English - 32
2014-02-11 2:59:23