Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.
Attach the hook to the tool.
1
Fig.39
► 1. Hook
Detaching the tool
When setting down the tool, unlock the buckle on the
hanging band with one hand while holding the tool with
the other hand.
1
Fig.40
► 1. Buckle
NOTE: The buckle is not equipped depending on the
type of band.
If you need to release the tool quickly, follow the steps below.
1.
Push the levers on the buckle of the waist belt to
unlock the buckle.
1
Fig.41
► 1. Buckle 2. Lever
2.
Take off the shoulder harness to release the tool
and the unit.
Fig.42
► 1. Shoulder harness
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
CAUTION:
Always wear gloves when perform-
ing any inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
18 ENGLISH
2
1
Publicité
Table des Matières
