Westfalia 316264600001 Notice De Montage page 2

SIARR
5025
PREPARATION
* Beneath the vehicle, remove the plastic protective cover.
* Cut the protective cover to shape according to detail 1.
* Cut the wedge blocks according to detail 2.
ASSEMBLY
* Insert the D cross struts and their screws inside
the side frames at the vehicle's X points.
* On the inner side of the side frames, lay out the A and B
arms with the X points, insert the C discs between the side
frames, then, without tightening, attach the X screw block.
* Lay out the hitch mechanism ensemble, then, without tightening,
attach it to the V – W points with the aid of the V – W screws.
FINISHING
* Tighten all screws to the pairs indicated below
in the following order: X – V – W.
* Put the protective cover back in place.
* Mount the head of the hitch mechanism to the Y points.
FASTENING KIT
2 HM10x30 screws cl8.8
V
2 DEC10 washers
2 HM10x35 screws cl8.8
W
2 DEC10 washers
2 HM10 nuts cl8.8
X
2 HM12x60 screws cl8.8
Y
2 HM12 nuts cl8.8
2 DEC12 washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
Detail 1
4 HM12x110 screws cl8.8
4 DEC12 washers
4 écrous HM12 cl8.8
4 foam discs 12.5/30 5mm thick (C)
4 12,5/30 flat washers
4 foam discs 20/32 10mm thick
4 spacers dia.12,5/22 Lg.70mm (D)
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
60
120
Type
Type
SI074 Approval No.
Towbar for Renault
Laguna III Break (Long e24*94/20*00*0108
Removable Ball-and-Socket Joint)
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM5000\NDM5025-D - FOLIO NDMANG
316264600001
!
Detail 2
Cut the 4 blocks
Max. Total Max. Total
Authori. Weight Towable Weight
2 400 KG 1 700 KG
Affix the sticker in
the position indicated
Max. Verti- Value
cal load D
75 kg 9,76 Kn