Functional Description; Carton Contents - Delta 22-790X Manuel D'utilisation

FOREWORD
The DELTA Model 22-790X is a 15" (381mm) Planer with an adjustable feed rate for optimum planing under load. This machine
has cutting capacities of 15" (381 mm) width, 6-1/2" (165 mm) thick, and 1/8" (5 mm) depth of cut.
NOTICE: The photo on the manual cover illustarates the current production model. All other illustrations contained in the
manual are representative only and may not depict the actual labeling or accessories included. These are intended to
illustrate technique only.
Your new 15" (381 mm) planer head is shipped
complete in one box. The machine is very heavy.
Take care when you remove the machine. (See the
section How To Lift The Machine).
The Planer stand comes in a separate box. Open
both boxes and locate all parts prior to assembly.
1. Knife setting gauge
2. Elevation handwheel
3. Open end wrench (14 and 17 mm)
4. Open end wrench (10 and 12 mm)
5. Handwheel handle
6. Shifter knob
7. 2.5 mm hex wrench
8. 3 mm hex wrench
9. 4 mm hex wrench
10. 6 mm hex wrench
11. 5" (127 mm) to 4" (101.6 mm) dust hose
adapter
12. dust hood
13. Top cover
14. M6 hex head flange screw (3) (for fastening
top cover to machine)
15. M6 x 16 mm hex head bolt (2) (For securing
the power cord)
16. M5 Phillips head self-tapping screw (2) (for
attaching the dust hood)
17. M6 flat washers (2)
18. M5 (large ID) flat washers (2)
19. Cord clamps (2)
20. Planer head
14
19

FUNCTIONAL DESCRIPTION

CARTON CONTENTS

3
15
16
17 18
2
4
12
6
1
6
5
8
7
13
20
11
10
9