Beta 1823 60 Mode D'emploi page 6

INSTRUCTIONS FOR USE
4.
alterations.
nanze del sistema di comando. IL mancato rispetto delle avvertenze può essere causa di infortuni, lesioni o rischi per la salute.
5.
5.1 The power cord can only be inserted into approved power sockets or adapters.
5.2 High Temperature
The temperature of the soldering tip will exceed 400 °C (752 °F) when the power switch is on. Since mishandling may lead to burn
dangerous;
5.3 Take care of your soldering station
5.4 Maintenance
spect moving parts for error-free operation and that they do not bind, and check whether any parts are damaged. Damaged safety
devices and parts must be repaired or replaced by trained technicians, unless otherwise stated in this operation manual. Use only
5.5 Keep children at a distance
Unused soldering tools should be stored in a dry location which is out of the reach of children. Switch off all unused soldering tools.
5.6 Protect yourself against electrical shocks
Avoid touching grounded parts with your body, e.g. pipes and heating radiators. The grip of the antistatic soldering tool is con-
ductive.
5.7 Work environment
Do not use the soldering tool in a moist or wet environment. The soldering iron should be placed on its stand after use.
5.8 Observe the safety regulations that are applicable to your workplace.
6
EN
-