Powerboost - Leonard LAI6001F Notice D'utilisation

Masquer les pouces Voir aussi pour LAI6001F:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

then chose the highest heat setting 9 and
touch
again. Immediately touch
desired heat setting.
To deactivate the function: change the heat
setting.

5.6 PowerBoost

This function makes more power available to
the induction cooking zones. The function can
be activated for the induction cooking zone
only for a limited period of time. After this time
the induction cooking zone automatically sets
back to the highest heat setting.
Refer to "Technical data" chapter.
To activate the function for a cooking
zone: touch
.
To deactivate the function: touch
5.7 Timer
• Count Down Timer
You can use this function to set the length of
a single cooking session.
First set the heat setting for the cooking zone,
then set the function.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function or change the
time: touch
or
time (00 - 99 minutes). When the indicator of
the cooking zone starts to flash, the time
counts down.
To see the remaining time: touch
the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To deactivate the function: touch
the cooking zone and then touch
remaining time counts down to 00. The
indicator of the cooking zone disappears.
When the countdown ends, an
acoustic signal sounds and 00 flashes.
The cooking zone deactivates.
10
ENGLISH
to set a
comes on.
or
of the timer to set the
to set
to set
. The
To stop the sound: touch
• Minute Minder
You can use this function when the hob is
activated and the cooking zones do not
operate. The heat setting display shows
To activate the function: touch
touch
or
When the time finishes, an acoustic signal
sounds and 00 flashes.
To stop the sound: touch
To deactivate the function: touch
then touch
. The remaining time counts
down to 00.
The function has no effect on the
operation of the cooking zones.
.
5.8 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other symbols
on the control panels are locked.
The function does not stop the timer
functions.
1. To activate the function: press
comes on. The heat setting is lowered to
1.
2. To deactivate the function: press
The previous heat setting comes on.
5.9 Lock
You can lock the control panel while cooking
zones operate. It prevents an accidental
change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob, you
also deactivate this function.
.
of the timer to set the time.
.
.
and then
and
.
.
.
. The

Publicité

Table des Matières
loading

Table des Matières