Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3. Max. Pendulum action for: cutting wood; if no fine cutting edges required.
e. Blade storage (Fig.5)
Fig. 5
f. Parallel guide (Fig.6)
Fig. 6
g. Selecting the speed (Fig.7)
Fig. 7
•
Convenient feature on the saw is the
blade storage compartment.
•
To open: pull the blade storage cover
out.
•
To close: push the cover in with your
thumb or finger.
•
The parallel guide fits into the shoe
plate and is locked in place by the
parallel guide lock screw.
•
It is used to guide the jigsaw along a
straight line, which can be an edge
of a work-piece or a piece of straight
timber clamped to the work-piece.
•
By changing the position of the guide
and using the same straight edge as
a guide, it is possible to quickly and
easily make parallel cuts in the work-
piece.
NOTE: When adjusting the cutting angle,
you can move the parallel guide lock
screw to the left or right.
•
With the speed controller, the rate of
oscillation can be selected (also
during operation). Rotate the speed
controller to choose the suitable
speed.
•
The optimum speed depends on the
material and should be determined by
carrying out a practical test.
•
Stage 1: slow, Stage 6: quick
Publicité
Table des Matières
