Installing And Connecting The Liprotec-Easy System; Installation Requirements - Schluter Systems LIPROTEC-EASY Mode D'emploi

LIPROTEC-P Operating Instructions
Schlüter -LED-Color-Control »
®
Schlüter -LED-Color-Control is an app for mobile devices that can be used to control the
®
LED system.
Schlüter -LED-Color-Control can be used to carry out all the functions that can also be car-
®
ried out via the radio remote control. Schlüter
Android operating systems.
The following functions are also available:
• Changing Favourites
• Personalising lighting properties
• Using dynamic mode
4 Installing and connecting the LIPROTEC-EASY
system

4.1 Installation requirements

The following basic requirements must be met to ensure that the LED system operates as
intended and that hazards are avoided:
• A free power socket must be available within range of the mains cable in order to connect
the power supply.
• For permanent mounting of the LED tubes, the mounting profiles must be fixed in accord-
ance with the state of the art.
• All cables, plug connections, the power supply and the Bluetooth receiver must be kept
permanently dry.
• The cable length in one strand must not exceed 10 m.
• No more than 6 plug connections may be used within a strand.
• The Bluetooth receiver must not be shielded by metallic objects (e.g. reinforcements).
• Never connect 2 Bluetooth receivers in series.
• LED tubes must never be bent with a bending radius < 500 mm.
• LED tubes must never be bent laterally over the flanks.
• The power supply must be of a sufficient size for the connected LED tubes.
WARNING!
Risk of injury due to intolerance of light patterns!
In dynamic mode, combinations of flashing frequencies, contrast chang-
es and colours can be set, which can cause severe reactions in certain
groups of people (e.g. headache or epileptic seizures). Epileptic seizures
can lead to serious secondary injuries, such as those caused by biting the
tongue or shocks.
– Use dynamic mode only after consultation with a doctor if there are
epileptic disorders within the family.
– Stop dynamic mode immediately at the first signs of any discomfort.
2
-LED-Color-Control is available for the iOS and
®
EN
51