Texas TX-501 Manuel De L'utilisateur page 17

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
The machine operator is responsible for the safety of other people in the vicinity.
Never use the machine when there are other people, particularly children or animals,
nearby.
Minors must not be permitted to operate the machine.
The machine should only be lent to persons who are familiar with its operation.
The operating manual should always accompany the machine when it is lent to
others.
The cultivator must only be operated by persons who are rested, healthy and fit. If
the work is tiring, regular breaks should be taken. Do not use the machine under the
influence of alcohol.
The control units fitted at the factory (e.g. throttle cable from handle) must not be
removed or uncovered.
Always check before starting that nuts and bolts are correctly tightened.
When the engine is running, do not pull the handle for forward speed and the
handle for reverse speed at the same time! This will damage the transmission.
Always release one handle before the other is used.
Always stop the motor before doing any repair or maintenance work. Likewise,
the motor should always be stopped during transport.
Always exercise extra precaution when using the machine on sloped terrain.
Always work sideways on slopes, never up and down. Be extra alert when
changing directions.
Do not use the machine on very steep slopes.
Never use the cultivator in enclosed areas. It is very hazardous to your health
to inhale the exhaust from the motor.
Be sure that there is sufficient lighting to use the cultivator. The cultivator
should only be used in daylight or areas that are sufficiently lit.
Never run with the machine.
Always stop the motor before moving or lifting the cultivator.
Always stop the motor before leaving the cultivator.
"Caution! Rotating blades"
Using the machine on steep slopes is dangerous!
Only use the machine in areas where it can be operated safely!
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tx-502

Table des Matières