Onboard LEDs
EZ Debug LED
These LEDs indicate the debug status of the motherboard.
DIMM LEDs
These LED indicate the memory modules are installed.
XMP LED
This LED indicates the XMP (Extreme Memory Profile) mode is enabled.
JPWRLED1: LED power input
This connector is used by retailers to demonstrate onboard LED light effects.
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected
or fail.
DIMM LEDs
XMP LED
JPWRLED1 - LED power input
31
Onboard LEDs