Battery Charging and Alerts
Open the Charging port cover and connect the charger to the Charging port.
Slide and hold the Volume jog switch in the volume down (
Indicator lamp and battery level by voice.
Vibration Alert Settings
2 sec
Out of Range
If the device connected to the product is out of effective communication range (33 feet/10 meters),
the communication signal becomes weak and the communication is lost.
If the device comes back within effective communication range, the product automatically
reconnects to the device. If the device is not automatically reconnected, press the Call button on the
product to connect to it manually.
If a device that is not in use goes out of communication range when multiple devices are connected,
a voice message will indicate that the connection is lost. In this case, the automatic reconnection
function is not supported.
8
Indicator Lamp
Battery Status
Battery Status
Indicator Lamp
The vibration alert is automatically set to the ON when you turn on
the power.
To activate or deactivate the vibration setting, slide and hold the
Volume jog switch in the volume up (
NOTE: When vibration is turned off, the HBS-780 will not vibrate
when receiving an incoming call.
Red
Purple
Charging
80%
) direction for one second to check the
Sufficient
Normal
Blue flashes
Purple flashes
three times
three times
) direction for two seconds.
Blue
Completed
Insufficient
Red flashes
three times