Installation Instructions; Installation Material; Kit Supplied With Dishwasher - SCHOLTES LTE S3 XL60HZ Instructions Pour L'installation

INSTALLATION
INSTRUCTIONS

3 INSTALLATION MATERIAL

To install the dishwasher correctly, the following materials
are required:
•
Phillips screwdriver (ref. A fig. 3-01);
•
spirit level (ref. B fig. 3-01);
•
tape measure (ref. C fig. 3-01);
•
compass saw (ref. D fig. 3-01);
•
pencil (ref. E fig. 3-01);
•
file (ref. F fig. 3-01);
•
13 mm open-ended wrench (ref. G fig. 3-01);
•
plumbing pliers (ref. H fig. 3-01);
•
drill (ref. I fig. 3-01);
•
safety gloves (ref. L fig. 3-01).
Fig. 3-01

3.1 Kit supplied with dishwasher

(models LTE)
The kit supplied with the dishwasher comprises:
•
adhesive steam guard (ref. A fig. 3-02);
•
1 steel steam guard (ref. B fig. 3-02);*
•
1 template for door panel (ref. C fig. 3-02);
•
2 hooks for door panel (ref. D fig. 3-02);
•
8 screws for securing the door panel hooks (ref. E fig.
3-02);
•
2 screws for securing the door (ref. F fig. 3-02);
•
2 screws for fixing the dishwasher to the adjacent
walls (ref. G fig. 3-02);
•
2 screw caps (ref. H fig. 3-02).
•
2 adjustment feet (only for some models) (ref. I fig. 3-
02);
•
2 nuts (only for some models) (ref. L fig. 3-02);
•
2 washers (only for some models) (ref. M fig. 3-02).
Fig. 3-02
* The adhesive protection is suitable for kitchens with
worktops that do not allow the steel protection to be
fixed with screws (e.g.:+ marble or masonry), but it can
be also used with other materials.
EN
7